Servo cable, cable is a general term for optical cables, cables, and other items. There are many uses for cables, mainly for controlling installation, connecting equipment, transmitting power, and other multiple functions. They are a common and indispensable thing in daily life. Due to the charged cable, installation requires special caution.

Next, our editor will explain to you the reasons and troubleshooting methods for poor bonding of servo cables：

The phenomenon of poor sealing：

On the outer surface of the plastic layer, if the plastic is not well combined, there may be a black mark and, in severe cases, cracks. The bonding area of the plastic layer is not well plasticized, and if there are lumps or small particles, they can be easily peeled off by hand The controlled temperature is relatively low, especially for the control temperature of the machine head.

Reasons for poor sealing:

Low temperature control leads to poor plasticization. Long term use of the machine head causes severe wear and tear. The temperature control of the machine head fails, causing low temperatures and poor plastic lamination.

Methods to eliminate poor adhesive seams:

Appropriately increase the control temperature, especially the control temperature of the machine head. The outer side of the machine head is insulated with a thermal insulation device. Add two layers of filter screens to increase pressure and improve the plasticization degree of plastic.